Luck of the Irish C.P Soap Recipe

Luck of the Irish C.P Soap Recipe

Equipment needed:

2- 87 ounce buckets for weighing & melting oils.
2 Spatulas
2 Glass beakers (weigh out lye in one, water in the second)
1 Powder Duster
pH testing strips

  


Ingredients:

6.55 oz wt. of Sodium Hydroxide
18    oz wt. Distilled Water

4      oz wt. Apricot Kernel Oil
4      oz wt. Avocado Oil
4      oz wt. Castor Oil
2      oz wt. Cocoa Butter
7      oz wt. Coconut Oil
2      oz wt. Mango Butter
7      oz wt. Palm Kernel Oil
12    oz wt. Palm Oil (sustainable)
6      oz wt. Safflower Oil

1 1/2 Scoops (1.25 cc scoop) of  Aqua Green Mica
1 1/2 Scoops (1.25 cc scoop) Fine Satin Gold Mica


Weigh out your ingredients and follow basic soap making directions:
Basic Soapmaking Directions: 
  • Put on your safety goggles & neoprene gloves, combine your sodium hydroxide & your liquid, stir completely. Set the lye aside and allow it to cool between 100 – 125 degrees.
  • Weigh your oils & heat. Temperature of oils needs to be between 100 – 125 degrees. If you are coloring your soap, add it to your oils at this time.
  • When both your lye & your oils are at approximately the same temperature (100 – 125 degrees) you need to combine them. Use precautions to avoid splashing. Stir with a stick blender until you reach light trace.
  • Add your Fragrance Oil, stir with the stick blender, don't let the soap get too thick.
  • Separate into two 87 oz buckets & color one half of the soap with the Aqua Green Mica. Stir in with a spatula. (pre-mix your Aqua Green Mica in some water so that it blends in easily.
  • Pour a thin layer of the green soap in the left side of mold, pour a thin layer of the natural on the right side. Then add a thin layer of natural (not colored)on top of the left side green, and green on top of the right side natural, continue until you get to the top and have used all your soap. 
  • I finished with green on the top. Once the soap has thickened enough to go back with a spoon or spatula and create peaks down the center (see pic). Go ahead and do this. Last will be to use your duster and sprinkle the fine satin gold mica over the top. 
  • Allow the soap to sit overnight before testing the pH (should be an 8) and then cutting & stacking so the bars can cure for a few weeks prior to using.






View Post

Milk Bath Fizzers Recipe

Pin It

Milk Bath Fizzers  from our Home Spa Retreat Bulletin

1 TBSP Powder Milk
1/2 cup Citric Acid
1/4 cup Arrowroot Powder
1/2 cup Baking Soda
1.5 oz distilled water (In a Spray Bottle)
15 drops Essential or Fragrance Oil
                                                                
Instructions:
1. Place all of your dry ingredients in a bowl and mix together,

2. Using your water, spritz your mixture lightly (avoid adding too much water at one time, this will activate your fizz).


3. Continue misting the mixture with water     while you stir until all the water is gone.
                                                                  4. Add your fragrance or essential oil and stir, making sure that you have a consistent blend.

5. Your mixture may appear dry, but if you can pick up a handful and it sticks together, then it is the right consistency.

6. Press your mixture into the bottom of a mold ( drawer organizer works perfect, see pic).

7. Wait for the fizzer blend to completely harden over the next 8 hours.

8. Chip out the fizz 

with a Knife. You will have a bunch of random chunks. Store or package them in our PET jars. One recipe make enough to fill a 16 oz PET Jar.

    View Post
    Next PostNewer Posts Previous PostOlder Posts Home
    BLOGGER TEMPLATES BY pipdig